Category Archives: CMIS 102

CMIS 102 Homework 1 Solution (100% Correct) latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-homework-1-solution-latest

CMIS 102 Homework 1 Solution (100% Correct) latest

 

 

Introduction to Problem Solving and Algorithm Design

Using the above Code of Ethics, Pick at least 2 of the 8 principles and describe what these principles mean to you. In your write-up, summarize the principles you selected in your own words and provide at least one example of an activity or action you could take that would support each principle and one example of an activity or action that you believe would violate each principle. Be sure your document is well-written with minimal grammatical and spelling issues.

 

 

 For more Assignments visit  http://www.assignmentclick.com

CMIS 102 Homework 2 Test Case Creation Using the following pseudocode (100% Correct) latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-homework-2-test-case-creation-using-the-following-pseudocode-latest

CMIS 102 Homework 2 Test Case Creation Using the following pseudocode (100% Correct) latest

 

Homework 2 – Test Case Creation Using the following pseudocode, provide 3 unique test cases that would help validate your algorithm. Be sure to place the test cases in a table showing the input https://www.coursehero.com/tutors-problems/Computer-Science/10754291-I-need-help-with-c-coding-asap-how-much-will-it-be/zvalues, and expected output for each test case.

Write "Enter the price in dollars:"

Input Price

Write "Enter state sales tax(e.g. .06) :"

Input SalesTax

Set Price = Price + (Price * SalesTax)

Write "Price with Tax is" + Price Submit your word or PDF file to your assignments folder no later than the due date. Grading guidelines
Submission

A minimum of 3 test cases were provided.

Input provided and explained for each test case.

Expected output provided and explained for each test case.

Test cases represent a wide variety of possible input values (e.g. large numbers,small numbers (0), negative, or unexpected non-number entries).

Total Points

2
1
1
1
5

 

 

 

 For more Assignments visit  http://www.assignmentclick.com

CMIS 102 Homework 3 (100% Correct) latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-homework-3-latest

CMIS 102 Homework 3 (100% Correct) latest

 

Create your own unique While-End or (For End) repetition C code. You decide the theme. Be sure to provide an overview of what your repetition structure is doing. Please keep the design simple for this exercise. Just a few lines of code is all that is needed for this response. This should be code you wrote for an application that is interesting to you. In other words, make it your own and have fun with it.

Provide the C code and a screen capture showing the results of testing your code in an online compiler. Be sure to test your code with several test cases and show your test case table

 

 

 For more Assignments visit  http://www.assignmentclick.com

CMIS 102 Homework 4 Create your own Function latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-homework-4-create-your-own-function-latest

CMIS 102 Homework 4 Create your own Function latest

 

 

Create your own function in C that accepts one input parameter and returns a float number. You decide the theme. 

 

You should provide both your C code and an example call to the C code function. Be sure to provide an overview of what your function is doing. 

 

Provide a screen capture showing the results of testing your code in an online compiler. 

 

Be sure to test your code with several test cases and show your test case table. 

 

Submit your word or PDF file to your assignments folder no later than the due date.

 

 For more Assignments visit  http://www.assignmentclick.com

CMIS 102 Week 1 Hands-On Lab latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-week-1-hands-on-lab-latest

CMIS 102 Week 1 Hands-On Lab latest

 

This hands-on lab demonstrate a simple sequential print statements using an online C compiler such as ideone.com. You should follow the instructions to complete the lab as well as perform the learning exercises at the end of this lab.

Instructions

1. Open up any online C compiler (e.g ideone.com).

2. Be sure the C Language is selected.

3. Enter the code below into the editor. (Note: LEO doesn’t let you just copy and paste from this document so you can either download the document and then copy and paste or just go to the Code for HelloWorld link for this week and copy and paste from there.)

4. Click the submit, or run button.

5. Try the additional learning exercises on the next page. Here is what Hello, World! Looks like using ideone.com after it has successfully run
Hello, World C code

1
2
3
4
5
6 #include <stdio.h>

int main(void) {
printf(“Hello, World!”);
return 0;
}
Learning Exercises for you to complete

1. Remove the semi-colon (;) at the end of this statement:
1 printf(“Hello, World!”);
2. Describe what happens. Why is the semi-colon needed?
3. What happens if you add another printf statement such as:
1 printf(“Goodbye”); after the printf(“Hello, World!”); line?
4. Describe the latest output. Be sure to support your description with screen captures of executing the latest code.
5. Experiment by adding additional printf statements to your code such as:

1
2 printf(“Goodbye \n”);
printf(“Hello, again! \n”);
6. What does the “\n” do to the output?

CMIS 102 Week 1 Hands-On Lab
This hands-on lab demonstrate a simple sequential print statements using an online C compiler such as ideone.com. You should follow the instructions to complete the lab as well as perform the learning exercises at the end of this lab.

Instructions

1. Open up any online C compiler (e.g ideone.com).

2. Be sure the C Language is selected.

3. Enter the code below into the editor. (Note: LEO doesn’t let you just copy and paste from this document so you can either download the document and then copy and paste or just go to the Code for HelloWorld link for this week and copy and paste from there.)

4. Click the submit, or run button.

5. Try the additional learning exercises on the next page. Here is what Hello, World! Looks like using ideone.com after it has successfully run
Hello, World C code

1
2
3
4
5
6 #include <stdio.h>

int main(void) {
printf(“Hello, World!”);
return 0;
}
Learning Exercises for you to complete

1. Remove the semi-colon (;) at the end of this statement:

1 printf(“Hello, World!”);

2. Describe what happens. Why is the semi-colon needed?

3. What happens if you add another printf statement such as:

1 printf(“Goodbye”); after the printf(“Hello, World!”); line?

4. Describe the latest output. Be sure to support your description with screen captures of executing the latest code.

5. Experiment by adding additional printf statements to your code such as:

1
2 printf(“Goodbye \n”);
printf(“Hello, again! \n”);

6. What does the “\n” do to the output?

 

 

 For more Assignments visit  http://www.assignmentclick.com

CMIS 102 Week 2 Hands-On Lab latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-week-2-hands-on-lab-latest

CMIS 102 Week 2 Hands-On Lab latest

 

Overview

This hands-on lab allows you to follow and experiment with the critical steps of developing a program including the program description, analysis, test plan, design, and implementation with C code.

Program Description

This program will sum two integer numbers to yield a third integer number. Once the calculations are made the results of all the numbers will be printed to the output screen.

Analysis

We will use sequential programming statements.

We will define 3 integer numbers: a, b, c.

c will store the sum of a and b.

Test Plan

To understand this program the following input numbers could be used for testing:

a = 10
b = 20
c = a + b = 10 + 20 = 30

In table format the following results are expected:

Learning Exercises for you to complete

1. Change the C code to calculate the product of two integers as opposed to the sum of two integers. Support your experimentation with a screen capture of executing the latest code.

2. Prepare a latest test table with at least 3 distinct test cases listing input and expected output for the product of two integers.

3. Change the C code to calculate the quotient (e.g. a/b) of two floats (e.g. 2.3/1.5).Hint: Use float variable types as opposed to integers. What happens if the denominator is 0.0? Support your experimentation with screen captures of executing the latest code

4. Prepare a latest test table with at least 3 distinct test cases listing input and expected output for the quotient of two floats.
Submission

• Submit a neatly organized word (or PDF) document that demonstrates you successfully executed this lab on your machine using an online compiler. You should provide a screen capture of the resulting output.

• Also, provide the answers, associated screen captures, C Code and descriptions of your successful completion of learning exercises 1, 2, 3 and 4.

• The answers to the learning exercises, screen captures, C code and descriptions can be included in the same neatly organized document you prepared as you ran this lab. Note the code can be embedded in the word document. However; be sure all code compiles and runs perfectly before submitting the document.

• Submit your document no later than the due date listed in the syllabus or calendar.

 

 

 For more Assignments visit  http://www.assignmentclick.com

CMIS 102 Week 3 Hands-On Lab latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-week-3-hands-on-lab-latest

CMIS 102 Week 3 Hands-On Lab latest

 

Overview

This hands-on lab allows you to follow and experiment with the critical steps of developing a program including the program description, analysis, test plan, design, pseudocode visualization, and implementation with C code. The example provided uses mathematical operators and variable types. Program

Description

This program will calculate the area of a right triangle. The program will ask the user to enter the base and height and then use these values to calculate and then print the area of the triangle. The design step will include pseudocode.

Analysis

I will use sequential programming statements. I will define two float numbers for the base and height: base, height. Float numbers were selected as opposed to integers to make sure triangles of all dimensions are possible and not just whole numbers.

Float number will store the area: area

The area will be calculated by this formula

Area = ½ * (base * height)

For example if the base was 4.2 and the height was 5.3 the area would be calculated as:

Area = ½ * (4.2 * 5.3) = ½ * (22.26) = 11.13

Test Plan

To verify this program is working properly the following base and height values could be used for testing:

Learning Exercises to be complete (Setting up the code and the input parameters in ideone.com:)

1. Change the C code to calculate the perimeter of a triangle. Support your experimentation with a screen capture of executing the latest code

2. Prepare a latest test table with at least 3 distinct test cases listing input and expected output for the perimeter of a triangle.

3. What is this line of code doing?

1 scanf(“%f”, &height);

4. How would you change this line if you wanted to input an Integer as opposed to a float?

5. What are the values of f and g after executing the following C?

 

 

 For more Assignments visit  http://www.assignmentclick.com

CMIS 102 Week 4 Hands on Lab latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-week-4-hands-on-lab-latest

CMIS 102 Week 4 Hands on Lab latest

 

Week 4

Overview

This hands-on lab allows you to follow and experiment with the critical steps of developing a program including the program description, analysis, test plan, design (using pseudocode), and implementation with C code. The example provided uses sequential and selection statements.

Program Description

This program will calculate the sum of 5 integers. The program will ask the user to 5 integers. If the sumof the numbers is greater than 100, a message is printed stating the sum is over 100. The design step will include both pseudocode.

Analysis

I will use sequential, and selection programming statements.

I will define six integer numbers: value1, value2, value3, value4, value5 and sum. The value1, value2,value3, value4 and value5 variables will store the integers input by the user. The sum will store the sum of the 5 values.

The sum will be calculated by this formula:

sum = value1 + value2 + value3 + value4 + value5

For example, if the first values entered were value 1=1, value 2=1, value 3=2,value 4=2 and value 5=3 respectively:

sum = 1 + 1 + 2 + 2 + 3 = 9

The additional selection statement will be of this form:

If sum &gt; 100 then
print &quot;Sum is over 100&quot;
End If Test Plan
To verify this program is working properly the input values could be used for testing:
Test Case
1 2 Input
value1=1
value2=1
value3=1
value4=0
Value5=2
value=100
value=100
value=100
value=100
value=200 Expected Output
Sum = 5 Sum = 600
Sum is over 100. 1 3 value= -100
value= -100
value= -200
value = 0
value= 200 Sum = -200 Pseudocode
// This program will calculate the sum of 5 integers.
// Declare variables
Declare value1, value2, value3, value4, value5, sum as Integer
//Initialize Sum to 0
Set sum = 0
// Enter
Print
Input
Print
Input
Print
Input
Print
Input
Print
Input values
“Enter
value1
“Enter
value2
“Enter
value3
“Enter
value4
“Enter
value5 an Integer for value1”
an Integer for value2”
an Integer for value3”
an Integer for value4”
an Integer for value5” // Calculate sum
sum = value1 + value2 + value3 + value4 + value5
// Print results and messages
Print “Sum is “ + sum
If (sum &gt; 100)
Printf “Sum is over 100”
End if C Code
The following is the C Code that will compile in execute in the online compilers.
// C code
// This program will calculate the sum of 5 integers.
// Developer: Faculty CMIS102
// Date: Jan 31, XXXX
#include &lt;stdio.h&gt;
int main () 2 {
/* variable definition: */
int value1,value2,value3,value4,value5,sum; /* Initialize sum */
sum = 0;
printf(&quot;Enter an Integer
scanf(&quot;%d&quot;, &amp;value1);
printf(&quot;Enter an Integer
scanf(&quot;%d&quot;, &amp;value2);
printf(&quot;Enter an Integer
scanf(&quot;%d&quot;, &amp;value3);
printf(&quot;Enter an Integer
scanf(&quot;%d&quot;, &amp;value4);
printf(&quot;Enter an Integer
scanf(&quot;%d&quot;, &amp;value5); for value1\n&quot;);
for value2\n&quot;);
for value3\n&quot;);
for value4\n&quot;);
for value5\n&quot;); sum = value1 + value2 + value3 + value4 + value5;
printf(&quot;Sum is %d\n &quot; , sum );
if (sum &gt;100)
printf(&quot;Sum is over 100\n&quot;);
return 0;
}

Setting up the code and the input parameters in ideone.com:

Note the input integer values are 100, 100, 100, 200 and 100, for this test case. You can change these values to any valid integer values to match your test cases. 3 Results from running within ideone 4 Learning Exercises for you to complete

1. Demonstrate you successfully followed the steps in this lab by preparing screen captures of you
running the lab as specified in the Instructions above.

2. Change the C code to sum 10 integers as opposed to 5? (Hint: Please don’t use arrays or Loops for this. We will be using those features in another week.) Support your experimentation with a screen capture of executing the latest code 3. Using the code you create in step 1, modify the code to print an additional statement if the sum of the value is negative (Hint: Consider modifying the existing selection statement) Support your experimentation with a screen capture of executing the latest code. 4. Prepare a latest test table with at least 3 distinct test cases listing input and expected output for
the code you created after step 2.

5. Create your own C code implementation of one of the following mathematical formulas: a. y = mx + b; (slope of a line) Assume the user will be prompted to input m, x and b and the program will calculate y. If the value of y is greater than 10, inform the user the value is greater than 10.
b. a = PI * r*r; (area of circle). Assume the user will be prompted to input the radius r. You can define PI as 3.1416. . If the value of a is greater than 10, inform the user the value is greater than 10.

c. v = 4/3 PI r*r*r; (volume of sphere) Assume the user will be prompted to input the radius r. You can define PI at 3.1416. If the value of v is greater than 10, inform the user the value is greater than 10.

Be sure you provide not only the C code but a test table with at least 3 distinct test cases listing input and expected output your mathematical formula. Submission

Submit a neatly organized word (or PDF) document that demonstrates you successfully executed this labon your machine using an online compiler. You should provide a screen capture of the resulting output.Submit all C code you created in files.

Also, provide the answers and any associated screen captures of your successful completion of exercises 1, 2, 3 and 4.

Submit your document no later than the due date listed in the syllabus or calendar.

5 Grading guidelines

Submission

Demonstrates the successful execution of this Lab within an online compiler. Provides supporting screen captures.

Modifies the C code to sum 10 integers as opposed to 5.

Supports your experimentation with screen captures of executing the code.

Using the code created in step 1, modifies the code to print an additional statement if the sum of the value is negative Supports your experimentation with a screen capture of executing the latest code.

Provides a latest test table with at least 3 distinct test cases listing input and expected output for the code you created after step 2.

Creates your own unique C code implementation of one of the provided mathematical formulas. Provides a latest test table with at least 3 distinct test cases listing input and expected output your mathematical formula. Supports your experimentation with a screen capture of executing the latest
code.

Document is well-organized, and contains minimal spelling and grammatical errors.

Total Points
2
2 2 1 2 1
10 6

 

 

 

 For more Assignments visit  http://www.assignmentclick.com

CMIS 102 Week 5 Hands-On Lab latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-week-5-hands-on-lab-latest

CMIS 102 Week 5 Hands-On Lab latest

 

Overview

This hands-on lab allows you to follow and experiment with the critical steps of developing a program including the program description, analysis, test plan, design (using pseudocode), and implementation with C code. The example provided uses sequential, selection and repetition statements.

Program Description

This program will calculate the average of 10 positive integers. The program will ask the user to 10 integers. If any of the values entered is negative, a message will be displayed asking the user to enter a value greater than 0. The program will use a loop to input the data.

Analysis

I will use sequential, selection and repetition programming statements. I will define two integer numbers: count, value and sum. count will store how many times values are entered. value will store the input. Sum will store the sum of all 10 integers. I will define one double number: avg. avg will store the average of the ten positive integers input.

The sum will be calculated by this formula:

Learning Exercises for you to complete

1. Change the code to average 20 integers as opposed to 10. Support your experimentation with screen captures of executing the latest code.

2. Prepare a latest test table with at least 3 distinct test cases listing input and expected output for the code you created after step 1.

3. What happens if you entered a value other than an integer? (For example a float or even a string). Support your experimentation with screen captures of executing the code.

4. Modify the code to allow the user to enter an unspecified number of positive integers and calculate the average. In other words, the user could enter number of positive integers. (Hint: You can prompt the user for how many they want to enter. Or; you could use a sentinel value to trigger when the user has completed entering values). You may need to conduct some research on your own to solve this problem. Prepare a latest test table with at least 3 distinct test cases listing input and expected output for the code you created. Support your experimentation with screen captures of executing the latest code

 

 

 For more Assignments visit  http://www.assignmentclick.com

CMIS 102 Week 7 Hands-On Lab latest

To Buy This material Click below link

http://www.assignmentclick.com/cmis-102-md-university-/cmis-102-week-7-hands-on-lab-latest

CMIS 102 Week 7 Hands-On Lab latest

 

Overview

This hands-on lab allows you to follow and experiment with the critical steps of developing a program including the program description, analysis, test plan, design, and implementation with C code. The example provided uses sequential, repetition, selection statements and two user-defined function.

Program Description

This program will provide options for a user to calculate the square or cube of a positive Integer input by a user. The program will prompt the user to enter an Integer and then prompt the user if they want to calculate the square of the cube of the number. Based on the inputs of the user, the program will output
the square of the cube of the positive integer. The program will then print the Integer and square or cube of the integer based on the user’s original choice. 

The program will continue to prompt the user for Integers and their calculation choice until the user enters a negative integer. The square and cube calculations should be calculated using a function.

Analysis

I will use sequential, selection, and repetition programming statements and functions for the cube and square calculations. I will define three Integer numbers: IntValue, MenuSelect, Results to store the Integer value input by the user, the Menu selection (1 for Square, 2 for Cube) of the user, and the results of the Square or Cube functions.

The Square function will take one Integer as input and return one Integer as the output. The calculation within the Square function is: Results = IntValue * IntValue

For example: if 10 was entered as the IntValue. Results = 10*10 = 100

The Cube function will take one Integer as input and return one Integer as the output. The calculation within the Cube function is: Results = IntValue * IntValue*IntValue

For example: if 10 was entered as the IntValue. Results = 10*10*10 = 1000

A repetition loop can be used to loop through iterations until a negative is entered:

Learning Exercises for you to complete

1. Using the Square and Cube functions as models, Create an application that includes a function named “Shrink” that would take an Integer and return the Integer divided by 2? (Hint: your returned value should probably be a double type.) Support your experimentation with screen captures of executing the latest code.

2. Prepare a latest test table with at least 3 distinct test cases listing input and expected output for the code you created after step 1.

3. What would happen if you removed the following code from our design? If intValue > 0 Support your argument with screen captures of executing the latest code.

4. Modify the original code and add an additional function of your choice. The function should be unique and something you created for this assignment. Support your experimentation with screen captures of executing the latest code. Prepare a test table with at least 3 distinct test cases listing input and expected output for your unique function.

 

 

 For more Assignments visit  http://www.assignmentclick.com