Category Archives: MGT 401 (latest)

MGT 401 Week 5 Final Paper

MGT 401 Week 5 Final Paper

Develop an Incident Action Plan (See page 22 of your textbook) based on the three job hazards identified in your Week Four “Risk Assessment Plan.” Reference the Sample Command Procedures for Emergency Response Operations, beginning on the bottom of page 412 in your textbook. Use this guideline to create an Incident Action Plan for your place of employment (or home). Tailor the Incident Action Plan to address your unique situation. In addition, address the seven common mistakes made by incident commanders on page 416.

For more Assignments visit

http://www.assignmentclick.com

MGT 401 Week 5 DQ 2 Regulations Procedures

MGT 401 Week 5 DQ 2 Regulations Procedures

Discuss the aftermath of a recent disaster. Describe at least three regulations or procedures and explain how they were applied/or not applied to prevent workers’ exposure to hazardous materials and other harmful conditions.

For more Assignments visit

http://www.assignmentclick.com

MGT 401 Week 5 DQ 1 Incident Response System

MGT 401 Week 5 DQ 1 Incident Response System

Why is it necessary for a business to have an Incident Response System in place? Does your place of employment have one? Explain in detail.

Respond to at least two of your classmates’ postings. 

 

For more Assignments visit

http://www.assignmentclick.com

MGT 401 Week 4 Risk Assessment Plan

MGT 401 Week 4 Risk Assessment Plan

(See pages 59 to 64 in the text). Using the template on page 61, carry out a risk assessment on at least three tasks you perform at work or in your home that relate to hazardous materials management. This might include cleaning tasks, fueling a vehicle, or chores at home such as painting, changing your car’s oil, and storing materials. When creating your assessment scenario, try to include a combination of material and/or confined-space or personal safety-equipment issues. You will reference these three job hazards when writing your “Final Paper.” 

For more Assignments visit

http://www.assignmentclick.com

MGT 401 Week 4 Quiz

MGT 401 Week 4 Quiz

1. Question : An area large enough to enter, not designed for occupancy, and hard to get in or out of is known as a ____ space.

confined

dangerous

permit-required

restricted

 

2.  Question : The process by which gases and vapors settle into layers within an area based on their weight is known as ____.

sedimentation

compaction

separation

stratification

 

3. Question : Dust that obscures visibility to less than ____ ft must be considered ignitable.

4

5

6

7

 

4. Question : The person positioned outside a confined space who monitors the conditions in and outside the space to ensure the safety of the entrant is known as the ____.

entry supervisor

co-entrant

entry worker

confined space attendant

 

5. Question : An operation in which entrants leave a confined space on their own power when an emergency occurs is known as ____.

internal rescue

non-entry rescue

self-rescue

attendant rescue

 

6. Question : An explosion caused when air is suddenly introduced into a confined area that contains high levels of heat and combustible gases is known as a(n) ____ explosion.

backdraft

flashover

combustion

ignition

 

7. Question : A ____ can collect small samples from inside a drum without damaging or affecting the material.

dipper

drum dipper

drum thief

drum sampler

 

8. Question : Changes in temperature can increase vapor production known as ____ and possibly lower vapor density, which would keep gases near the ground instead of allowing them to dissipate into the atmosphere.

vaporization

temperate

volatilization

dissipation

 

9. Question : An operation in which the attendant uses the retrieval equipment worn by entrants to pull them out of a confined space is known as ____.

internal rescue

non-entry rescue

self-rescue

attendant rescue

 

10. Question : The most significant weather event that may alter a contamination situation is ____.

rain

wind

snow

high temperatures

For more Assignments visit

http://www.assignmentclick.com

MGT 401 Week 4 DQ 2 Air Monitoring

MGT 401 Week 4 DQ 2 Air Monitoring

Identify the reasons for performing air monitoring. What reporting is necessary? What factors should you take into account when conducting air monitoring in an outside area?

Respond to at least two of your classmates’ postings. 

For more Assignments visit

http://www.assignmentclick.com

MGT 401 Week 4 DQ 1 Confined Spaces

MGT 401 Week 4 DQ 1 Confined Spaces

What are the most common causes of death in confined spaces? Which group of employees is most likely to succumb and why?

Respond to at least two of your classmates’ postings. 

 

 

For more Assignments visit

http://www.assignmentclick.com

MGT 401 Week 3 Respiratory Protection Selection

MGT 401 Week 3 Respiratory Protection Selection

 Complete the activity on page 250 and determine the proper response to the needs for personal protective equipment and how to protect workers in confined spaces 

For more Assignments visit

http://www.assignmentclick.com

MGT 401 Week 3 DQ 2 Supplied-Air Respirator (S.A.R.) vs. Air-Purifying Respirator (A.P.R)

MGT 401 Week 3 DQ 2 Supplied-Air Respirator (S.A.R.) vs. Air-Purifying Respirator (A.P.R)

What are the advantages and disadvantages of the S.A.R. versus the A.P.R.? What questions should you ask prior to selecting a respirator?

Respond to at least two of your classmates’ postings. 

 

For more Assignments visit

http://www.assignmentclick.com

MGT 401 Week 3 DQ 1 Respiratory Hazards

MGT 401 Week 3 DQ 1 Respiratory Hazards

Choose two of the five Respiratory Hazards. Provide a brief explanation of each hazard and describe a situation in which you may encounter them. What effects would each of these hazards have on your body? Respond to at least two of your classmates’ postings. 

For more Assignments visit

http://www.assignmentclick.com